T-bar ceiling system (MAX-CC-B1)

Product Details

Product Description

Product Code


Product Name

T-bar ceiling system


It is widely used in the pharmaceutical industry, electronics industry, aerospace  and other industries which need to use clean sheet. Light , FFU  and fire equipment and so on . The system is composed of aluminum alloy ceiling keel module system and ceiling plate system. The aluminum alloy ceiling keel module system is mainly used to bear the load of ceiling plate and control and adjust the ceiling distance and the level of the whole ceiling, Ceiling panels  connected with FFU, fire equipment, lamps and access ports .
This product include: hanging bar, square regulator, flange nuts, hex nuts, T-bolts, aluminum ceiling suspended keel , ceiling panels and other connections.


  • The ceiling system grid a is  visible in the lower part of the ceiling.

  • The ceiling  can be perfectly connected with other equipment in the clean room

  • The system ceiling has strong tightness and it is walkable

  • The ceiling system can be connected with MAX other types of partition system products perfectly

  • The ceiling system connection gap be same width with the wall gap


Standard width modulus: 1180 mm, 1160 mm
Recommended length: not more than 3000mm.It need to increase reinforcement 
Plate thickness: 50 / 55mm

Structure pictures

CCB爆炸图.JPG     单玻岩棉板分解图.JPG 

                                Explosion view                                                                            Panel structure

_DSC1280.jpg        2.jpg

                                  Site picture1                                                                                   Site picture2